-
- Shockwave & Electrotherapy
- EMS-Muscle Stimulation
- NEUROTRAC MYOPLUS2 / DUAL BIOFEEDBACK & STIM
neurotrac myoplus2 / dual biofeedback & stim
Description
- The Classic Biofeedback / ETS / Stimulation device. A proper tool for training and progress assessment.
- Pre-set programmes for Incontinence treatment, Sports and muscular development, neuro-muscular Rehabilitation.
- Designed for Physiotherapist in mind to be used as a portable tool. Suitable as a personal trainer for in-clinic or home use (under guidance).
- 2 channel EMG (Biofeedback) combined with 2 channels NMES (stimulation).
- 2 channel ETS (EMG triggered stimulation) with stimulation on 2 channels.
- Simple single-phase or multiphase operation: multiphase allows EMG/ETS/STIM to be combined in one programme.
- Multilingual LCD screen and voice prompts for Biofeedback.
- Manual and Automatic threshold control.
- EMG Biofeedback between stimulation (muscle activity and tiredness indication when using muscle stimulation).
- Stand alone device or used in conjunction with established multilingual software.
- Now with Bluetooth connectivity!
- The unit sends up to 10 metres of wireless data to PC software
EMG (Biofeedback)
- Dual channel EMG
- EMG Range: 0.2 to 2000 μV RMS (continuous)
- Sensitivity: 0.l μV RMS
- Accuracy: 4% of μV reading +/-0.3 μV at 200 Hz
- Selectable Bandpass filter – 3db Bandwidth,
- a. Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% – Reading below 235 microvolts 10 Hz +/-3 Hz to 370 Hz +/- 10% – Reading above 235 microvolts
- b. Narrow: 100 Hz +/- 5% to 370 Hz +/- 10%
- Notch filter: 50 Hz (Canada 60Hz) – 33 dbs (0. 1% accuracy)
- Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz
- Work / Rest periods: 2-99 seconds
- Number of Trials: 1-99Â
STIM (Neuromuscular Stimulation)
- Dual channel Stimulator
- Amplitude: 0-90 mA into 500 Ohm load – actual mA will tend to be less than indicated due to Electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms load the maximum will be limited to 50 mA.
- Type: Constant current, maximum output voltage 70 Volts +5 / -10 Volts
- Waveform: Symmetrical, rectangular, bi-phasic with net zero DC current
- Pulse width selection: 50-450 μS (2% accuracy)
- Pulse rate selection: 2-100 Hz (2% accuracy)
- Work / Rest periods: 2-99 seconds
- Time 1 – 99 minutes
- Ramp up time: 0.1 – 9.9 seconds
- Preset and user programmable treatment Programs
- Automatic output shut off with detection of open electrode above 0.5 mA
- Battery: 4 x AA. Low battery indication at 5.4 volts +/- 0.2 volts, automatic shut off when voltage dropps below the low indication. Replace the batteries immediately! The device goes off automatically when not in use (energy saving): for example when in settings and no key pressed over 1 minute, when in stimulation mode (home screen) and all channels are 0mA.
Show more
Show less
Specifications & Attachments
Specifications & Attachments
Delivery & Returns
Delivery & Returns
Free for orders over $150
Free for orders over $150 +GST.
$18.90 +GST UNDER $150
$18.90 +GST under $150 +GST.
Bulky Deliveries
All orders containing bulky/capital items will be quoted as per order and you will be notified via phone or email.
Click and Collect
Our free service allows you to place an order and pick up your purchase at your convenience. Click and Collect location will be shown at checkout.
Sustainable packaging
All orders are packed and shipped in recycled materials.
FREE LOLLIES
Free Lollies with every delivery.
RETURNS
Free returns conditions applied for consumable products. For more information, see our Returns page
Reviews
Reviews
Questions & Answers
Questions & Answers
We're here to help - for an instant answer to your question, chat with one of our Live Chat agents below or call us on 1800 366 863
You'll Also Love
